Generator InterLock Kit - How do I free up space for my Back Feed Breaker

How do I free up spaces for my
Back Feed Breaker?

Piggyback Breakers
To install the back feed breaker you will need 2 or 3 available spaces (look in the panel requirements for your kit to find the number of free spaces you will need which is on the kit selection page) in your panel. If you do not have enough free spaces in your panel you will need to order one piggyback breaker for each space that you need to create. If you order from us we will select the correct style and number of piggyback breakers that you will need based on the InterLock kit that is selected for your panel and the information that you provide for us. Please note that if you remove a 15 Amp breaker from your panel you should order a 15 Amp piggyback breaker to replace it. This also means that you should have another 15 Amp breaker somewhere in your panel to pair it with. If you are removing a 20 Amp breaker then the same should apply. If you need to pair a 15 Amp and a 20 Amp breaker then you should order a 15/20 Amp piggyback breaker.

Piggyback Breakers can be found in our
InterLock Kit Selection section.